Steel Timing Chain and Gear

Cg - Geometry Factor:0.0712; Ab - Cage-Cone Frontface Clearance:3.6 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:11800 N; R - Cone Backface To Clear Radius3:1.5 mm; a - Effective Center Location4:-3 mm; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:27800 lbf; G1 - Heat G

Inside Diameter (mm):90mm; Reference Speed Rating (r/min):2650; Availability:In Stock; Weight:0.02 KGS; Clearance:C3; Limiting Speed Rating (r/min):4300; Cage Type:Plastic; Fatigue Load Rating (kN):48.5; Outside Diameter (mm):160mm; Width (mm):52.4mm;

Minimum Buy Quantity:N/A; Brand:NTN; Weight / Kilogram:0.115; Inventory:0.0; Manufacturer Name:NTN; Category:Bearings; Product Group:M06288;

Category:Bearings; Product Group:B04264; EAN:0717905073939; Brand:BUNTING BEARINGS; Minimum Buy Quantity:N/A; Manufacturer Name:BUNTING BEARING CORP; Inventory:0.0; Weight / Kilogram:0.006;

d:130 mm; Outer Diameter (mm):200; Brand:ISO; Angle (α):40 °; Width (mm):66; Size (mm):130x200x66; D:200 mm; Bore Diameter (mm):130; B1:66 mm; Bearing number:7026 BDT;

EAN:0782475116713; Bore:1.188 Inch | 30.175; Mounting Bolts:13/32 Inch; Housing Material:Stamped Steel; Product Group:M06110; Category:Flange Block; Brand:DODGE; Harmonized Tariff Code:8483.20.40.40; Seals:Single Lip Contact; Inch - Metric:Inch;

Static Load Rating (kN):395; Availability:In Stock; Weight:5.20 KGS; Clearance:C3; Width (mm):41mm; Seals or Shields:Open Type; Grease Limiting Speed (r/min):2800; Cage Type:Steel; Oil Limiting Speed (r/min):3600; Dynamic Load Rating (kN):289;

Width (mm):22; L:81 mm; H2:49 mm; S:6 mm; Brand:NACHI; d:15 mm; B:22 mm; A:14 mm; A1:4 mm; Bearing number:BPF2;

D:47 mm; Size (mm):25x47x15; C:11,5 mm; Width (mm):15; Bore Diameter (mm):25; B:15 mm; Calculation factor (e):0,43; T:15 mm; Brand:Timken; Bearing number:32005X;

Manufacturer Name:TIMKEN; Outside Diameter:14 Inch | 355.6 Mill; UNSPSC:31171516; Minimum Buy Quantity:N/A; Assembly Width:6 Inch | 152.4 Milli; Brand:TIMKEN; Bore:9 Inch | 228.6 Milli; Other Features:2 Single Cone | 1 Do; Noun:Bearing;

A1:11 mm; G:M6x1; C:12.8 kN; Designation of bearing:UC202G2; C0:6.65 kN; Z:36.6 mm; s1:15.5 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of open end cover:SCO204-15; L:86 mm;

Noun:Bearing; UNSPSC:31171552; B:7 mm; Brand:NSK; D1:32 mm; Height:1.283 Inch | 32.6 Mi; d3:52 mm; Da max.:42 mm; Component Description:Roller Assembly Plus;

r1 min.:4 mm; Size (mm):150x320x65; Bore Diameter (mm):150; B:65 mm; C:65 mm; Basic dynamic load rating (C):514 kN; r2 min.:4 mm; rn:2 mm; an:12,7 mm; Brand:NKE;

d:55 mm; (Grease) Lubrication Speed:1200 r/min; r1 min.:0,6 mm; T:87 mm; B:20 mm; d3:120 mm; Brand:NSK; T2:53,5 mm; ra max.:1,5 mm; Width (mm):87;

Outside Diameter:310 mm; Limiting Speed - Grease:2,600 rpm; Enclosure:Open; D:310 mm; Fillet Radius/Chamfer:4 mm; (Grease) Lubrication Speed:2600 r/min; d:170 mm; Dynamic Load Rating:485,000 N; Angle (α):15 °; Bearing number:7234CDF;